Menu Close
How Many 80 lb Bags for 1.5 Yards of Concrete?

How Many 80 lb Bags for 1.5 Yards of Concrete?

1.5 cubic yards converts to 40.5 ft³ of concrete. At an assumed 0.6 ft³ yield, that works out to 68 80 lb bags before waste. A 10% example increases the estimate to 75 bags; the baseline represents 5,440 lb of dry mix, before water. At 1.5 cubic yards, this is a labor-intensive bagged mix plan rather than a simple quick repair. Confirm the product yield, actual form measurements and placement plan before purchasing.

Diy ProjectMedium load

Choose Your Calculator

Bag Calculator

Adjust volume, bag size, and waste assumptions to get a custom count.

Open Bag Calculator

Slab Calculator

Need to calculate dimensions first? Start with slab size, thickness, and volume.

Open Slab Calculator

Looking for more conversions? Browse all bag pages

Quick Answer

Main estimate
68 bags
80 lb bags for 1.5 yards
Volume
1.50 yd³
40.5 ft³ total volume
Waste scenarios
No waste 68 bags 5% waste 71 bags 10% waste 75 bags Total weight 5,440 lb

Bag yield used: 0.6 ft³ per bag. Bag yield guide

What to Keep in Mind for 1.5 yards

Ordering tip

For 1.5 cubic yards, the base order is 68 bags of 80 lb (5,440 lb dry mix). A 5% example gives 71 bags; 10% gives 75. Check the printed yield and choose an allowance from actual excavation, forms and handling losses, rather than automatically adding 10%. Ask about pallet quantities, delivery and unloading; compare bulk supplier quotes in cubic yards.

Common mistake to avoid

Do not confuse the 1.5 cubic yards concrete volume with the capacity of a vehicle or mixer. Moving 5,440 lb of dry mix may require delivery or multiple legally and safely loaded trips. Check delivery access for ready-mix early; a supplier minimum charge may still compare favorably with moving and mixing many bags. Never assume bag count alone proves a slab will handle vehicles or equipment.

Finish & curing

For a 1.5 cubic yards placement using 68 80 lb bags, plan the finish and curing procedure for the actual mix and weather before opening bags. Keep the water addition within the manufacturer's instructions and avoid long gaps between adjacent placements. Protect the fresh surface from rapid moisture loss and unfavorable temperatures; do not use a fixed 28-day age as automatic approval for heavy loading.

Practical Tips for 1.5 yards

Best fit for this amount

The calculation covers 1.5 cubic yards of placed concrete (40.5 ft³), not a pre-approved slab, footing or repair design. At 1.5 cubic yards, this is a labor-intensive bagged mix plan rather than a simple quick repair. If bags remain necessary, make a realistic batch schedule and confirm curing and finishing instructions for the selected mix. Thickness, soil support, reinforcement, joints and anticipated loading must be decided for the real application; those requirements cannot be inferred from 68 bags alone.

Logistics note

This option means handling 68 separate 80 lb bags weighing approximately 5,440 lb dry in total, excluding added water, tools and packaging. Using 80 lb bags reduces the number of units but increases the weight per lift; do not assume everyone can move them safely without assistance. Organize the mixing sequence and helpers in advance; a moderate volume can still demand substantial repeated lifting. Confirm the available vehicle payload, delivery access and mixer throughput instead of assuming all materials can arrive or be placed in one trip.

Bagged vs ready-mix

At 68 80 lb bags (5,440 lb dry), compare the total bag purchase and mixer workload with a local ready-mix quote. Bag mixing may be feasible with the right crew, equipment and a continuous placement plan. Delivery minimums, access restrictions and finish timing may matter more than the nominal cost per cubic foot.

Worked Example for 1.5 yards with 80 lb Bags

Step-by-step calculation for this exact volume and bag size:

  1. Volume in cubic feet: 40.50 ft³ (= 1.500 yd³ × 27)
  2. Bag yield: 0.6 ft³ per 80 lb bag
  3. Base count before rounding: 40.50 ÷ 0.6 = 67.50 → round up to 68 bags
  4. With 10% waste on the volume: (40.50 × 1.10) ÷ 0.6 = 74.25 → round up to 75 bags
  5. Total weight: 68 × 80 lb = 5,440 lb

Bag Counts by Waste Buffer for 1.5 yards

Pick a buffer based on site conditions: clean forms and accurate volume can run leaner; rough subgrade or hard-to-reach pours need more cushion.

Buffer80 lb bagsTotal weight
No buffer tight pour685,440 lb
+5% typical DIY715,680 lb
+10% recommended756,000 lb
+15% rough conditions786,240 lb

How Many 40, 60 & 80 lb Bags for 1.5 yards

Same volume, three common bag sizes. Bigger bags mean fewer units to mix but more weight per lift; smaller bags are easier to handle but the count climbs fast.

Bag sizeBags neededWith 10% wasteTotal weight
80 lb (this page)68755,440 lb
60 lb bags90995,400 lb
40 lb bags1351495,400 lb

Counts use standard yields (0.30 / 0.45 / 0.60 ft³ per 40 / 60 / 80 lb bag) and are rounded up. Confirm the yield printed on your product label before buying.

Using This Bag Count for 1.5 yards

1

Confirm volume

Start with 1.5 yards and verify whether your total is in cubic feet or cubic yards.

2

Check bag yield

This page assumes 0.6 ft³ per 80 lb bag.

3

Add waste

Use the 5% or 10% buffer if you expect spillage, uneven forms, or small measurement errors.

Getting Ready for 68 Bags

When bagged concrete makes sense: smaller pours, simple DIY jobs, and areas where a ready-mix truck is inconvenient.

When to compare ready-mix: once bag counts become very high, delivery may save labor and time. See our concrete cost per yard guide.

Scope check: this is a mid-size pour. Stage your mixing so earlier batches do not set before you finish, and weigh whether ready-mix is easier.

For more tools and conversions, try our concrete estimator or run counts in the bag calculator.

Questions People Ask About This Estimate

How many 80 lb bags of concrete do I need for 1.5 cubic yards?

Using an assumed yield of 0.6 ft³ per 80 lb bag, divide the measured 40.5 ft³ by 0.6 and round the result up to a whole bag: 68 bags before any waste allowance. That is about 5,440 lb of dry product. The cubic-yard volume converts to cubic feet at 27 ft³ per yard. Check your manufacturer's yield; other mixes can differ.

What changes if I allow 5% or 10% extra concrete for 1.5 cubic yards?

For 1.5 cubic yards in 80 lb bags, the base estimate is 68 bags. Applying the allowance to the unrounded concrete volume gives 71 bags at +5% and 75 at +10%; a +15% scenario would be 78. These are examples, not a universal recommendation. Select an allowance based on field measurements, uneven subgrade, formwork and likely placement losses, then check the supplier's ordering increments.

How much material would 68 80 lb bags weigh before mixing?

The estimated dry bag load is 5,440 lb (68 bags × 80 lb), before adding water or equipment. Using 80 lb bags reduces the number of units but increases the weight per lift; do not assume everyone can move them safely without assistance. Arrange a safe unloading and staging location and check vehicle limits. Organize the mixing sequence and helpers in advance; a moderate volume can still demand substantial repeated lifting. The volume estimate does not specify a safe crew size or mixing rate.

Would ready-mix be worth comparing for 1.5 cubic yards?

The estimate involves 68 80 lb bags, or approximately 5,440 lb of dry material before waste. Bag mixing may be feasible with the right crew, equipment and a continuous placement plan. Ask local suppliers about minimum orders and access, and factor in hauling, mixer capacity, labor and how long placing and finishing will take. Bagged concrete can be viable in some settings, but volume alone cannot determine structural suitability or the best supply method.

Related Guides

Need a Custom Bag Count?

Use our calculators to adjust volume, waste, and bag size for your exact project.

Disclaimer: Estimates only. Verify measurements, bag yield, site conditions, and product labels before buying materials. For structural work, consult a professional.

Leave a Reply

Your email address will not be published. Required fields are marked *