Menu Close

Concrete Slab Size Pages (4″ & 6″)

Browse ready-made slab estimates for common dimensions at 4-inch and 6-inch thicknesses. Compare cubic yards and bag quantities, or use the slab calculator for custom measurements.

Available: 100 slab pages Conversion: 1 yd³ = 27 ft³ Tip: Verify measurements and any extra allowance before ordering
Need Custom Dimensions?

Use the calculator when your slab size, thickness or extra allowance differs from a ready-made page.

Open Slab Calculator → Bag Calculator → All Project Pages →

What You Can Find Here

Compare 100 ready-made slab size estimates by dimensions and thickness. Each project page explains the specified concrete volume and provides material-planning information for that size.

Start with a matching slab size. If your job has different dimensions, an unusual thickness or a different allowance, use the Slab Calculator for a custom estimate.

Best Way to Use the Hub

  • Filter by 4-inch or 6-inch thickness to compare matching project pages.
  • Search a size such as 12x20 or 14x24, or use a shortcut below.
  • Sort by surface area to find smaller or larger slabs.
  • Check actual dimensions, bag yields and project requirements before ordering concrete.

All Slab Size Pages

100 results
1 2 … 5

Slab Size Pages FAQ

Should I use the 4-inch or 6-inch slab filter?

Use the 4-inch filter for lighter residential slabs such as patios or walkways, and the 6-inch filter when you need thicker slabs for heavier loads or more demanding use cases. Always confirm the final slab design for your project conditions.

What is the difference between a slab size page and the slab calculator?

A slab size page gives you a fast estimate for a common size, while the slab calculator is better when your dimensions, thickness, or waste allowance are custom.

Are the bag counts and cubic yards exact?

No. They are planning estimates. Final material needs can change with site conditions, over-excavation, waste, and the yield printed on the product you buy.

Do these slab pages include a waste allowance?

They are meant for planning, but the right waste allowance depends on the pour, formwork, and jobsite conditions. It is still smart to review the final number before ordering concrete.

Can I use these slab pages for patios, driveways, and shed slabs?

Yes. They work well as quick planning pages for common slab projects such as patios, walkways, driveways, pads, and shed bases, as long as you confirm the final thickness and reinforcement needs for the job.

Other Project Types

Concrete Bag Pages

Estimating a pour by the bag? Browse ready-made estimates for 40, 60 and 80 lb concrete mix across common concrete volumes.

Bag Conversion Pages →

Concrete Footing Pages

Compare square, rectangular and round footing dimensions with concrete volume and bag estimates. Verify structural requirements separately.

Footing Pages →

Disclaimer: These are material estimates, not structural design specifications. Verify slab dimensions, site conditions, required concrete properties and product yields before ordering.